RockUSB Driver is a tool that allows you to connect your Android device to your computer using a USB cable. It is compatible with various Android devices that use Rockchip chipset, such as tablets, TV boxes, and smartphones. RockUSB Driver v2.0 is the latest version of the tool that supports Windows 8, 10 and 11 as well as Windows 7.
In this article, we will show you how to install RockUSB Driver v2.0 on Windows 7 step by step. Before you begin, make sure you have downloaded the RockUSB Driver v2.0 zip file from the link below[^1^]. You will also need a USB cable and your Android device.
After downloading the RockUSB Driver v2.0 zip file, you need to extract it to a folder on your computer. You can use any file extraction software, such as WinRAR or 7-Zip. Right-click on the zip file and select \"Extract Here\" or \"Extract to Rockusb_Driver_v2.0\". You will see a folder named \"Rockusb_Driver_v2.0\" with several files inside.
Step 2: Run the DriverInstall.exe file
Open the \"Rockusb_Driver_v2.0\" folder and double-click on the \"DriverInstall.exe\" file. This will launch the RockUSB Driver Installer program. You will see a window with two options: \"Install Driver\" and \"Uninstall Driver\". Click on \"Install Driver\" to proceed.
Step 3: Select your device type and click \"Next\"
The next window will ask you to select your device type from a drop-down menu. You can choose from four options: \"RK29 Device\", \"RK30 Device\", \"RK31 Device\", or \"RK32 Device\". Depending on your Android device model, you need to select the appropriate option. If you are not sure, you can check the specifications of your device online or contact the manufacturer. After selecting your device type, click on \"Next\".
Step 4: Connect your Android device to your computer
The next window will prompt you to connect your Android device to your computer using a USB cable. Make sure your device is powered off and has enough battery charge. Then, plug one end of the USB cable into your device and the other end into your computer's USB port.
Step 5: Wait for the driver installation to complete
The next window will show you the progress of the driver installation. You will see a green bar filling up and a message saying \"Installing driver...\". Do not disconnect your device or close the program until the installation is complete. This may take a few minutes depending on your computer speed and device model.
Step 6: Click \"Finish\" and reboot your computer
Once the driver installation is complete, you will see a message saying \"Driver installed successfully\". Click on \"Finish\" to close the program. You will also see a pop-up window asking you to reboot your computer for the changes to take effect. Click on \"Yes\" to restart your computer.
Congratulations! You have successfully installed RockUSB Driver v2.0 on Windows 7
Now you can use your Android device with Rockchip chipset on your Windows 7 computer. You can transfer files, flash firmware, root your device, or perform other tasks using various tools that support RockUSB Driver. 29c81ba772